1982 kawasaki Z 250 C "definition adjusted" Questions

noisy timing chain My Kawasaki Z 250 C was in storage for 6 months. When I started it the timing chain was noisy, it was not noisy prior to storage. Will this fix it self if I run the engine until it ...

when warm i notice a cam chain type noise. could this be a worn cam chain tensioner . the bike has covered 36000 miles it can either be a worn tensioner or need for a valve adjustment. if you rev the ...

How do you know a chain and sprockets need replacing? Chain seems to be stretching regularly When the chain adjusters are nearing maximum adjustment range the chain is definitely ready to be replaced.

2009 Yamaha V-star, parade last December, clutch started to slip. now engages at the top of the lever. Can I adjust the cable or should I take it to the shop? Try giving the lever more free play, you ...

1997zx6 run good overloading flooding out gas mixing in oil kill out and want crank until sit for awhile drain the go dead trying to start it have to let it sit a jump it off You definitely need to ...

Somthing broke Had a new drive belt installed, was adjusted wrong and could barely roll the bike had it towed back and readjusted. Went out for a ride and somthing went klunk. Now it will shift but ...

I have a 83 Yamaha 115 v4 2 stroke. When I give it throttle it takes 3-5 seconds before it engages And in the mid range it will not stay level, it will just keep accelerating. I'm thinking cable? ...

I recently purchased a 1978 Honda Goldwing. It had some old gas in the tank so I removed the old gas and replaced the fuel filter. The bike was idling fair before now it's extremely high. Does ...

Carb Sync on an 01 YZF 600R Where are the vacuum ports on the carbs of an 01 YZF 600R. I bought gauges and need to know where to place the hoses. Also. Do I use the throttle body adjustment to sync? ...

replace handle bars on a 2006 HarleyDavidson RoadKing Replacing stock handle bars with 2'' touring pull-back handle bars. Must you replace clutch cable, thorttle cable and brake line? How hard is this