Gestetner DSm622sp Digital Imaging System "neck toner" Questions

...neck copier reads the amount of waste toner. Error could arrise eaven if the neck is only dirty. Permanent solution is to disconnect the connector above waste toner box. But be sure to clean the ...

...toner bottle neck gets some waste toner on it and it blocks the sensor.... It is a bad design by Canon. The waste toner bottle is on the Left side of the copier, toward the rear of the copier. The ...

toner bottle neck is dirty and the copier thinks it is full. It's a poor design from Canon. The waste toner is on the left rear side of the copier. It is behind a panel with one screw that holds it in

...neck is not clouded with toner otherwise even the bottle is empty still it will detect waste toner is full .hope this will help When cleaning the neck of the bottle you should also clean the sensors ...

...neck of the bottle because if there is toner stuck to it(which there usually is) the machinestill thinks it's full because an optical sensor reads the level through this neck - through a circular ...

neck is clear and not soiled with toner before placing it back into the machine. Turn the machine on and check to see if the code went away. 2. If the container isempty and the code is still displayed

...toner deposits stay on neck of bottle it cant see threw it so still thinks it is full, Toner is messy stuff, empty with care, while you are there locate the sensor that looks threw the neck and clean ...

...botlle is two small around " holes " where the toner sansor monitors the waste amount.Clean the neck verry good and dry also. Use some antistatic detergent to prevent toner sticking. Hope that

neck is clear and not soiled with toner before placing it back into the machine. Turn the machine on and check to see if the code went away. 2. If the container isempty and the code is still displayed

...neck of the waste toner bottle well?  If you look at the neck there are two clear looking circles that will have to be super clean.  I've always punched holes with a needle nose pliers ...