...work. Check and replace the following on the smps: Cs-860 & Cm-860 1500uf/10v With 2200uf/16v Cm-856,Cm-858,Cs-859,Cs-861 With 1000uf/25v Replaced Cm-854 & Cs-857 With 2200uf/25v then let me ...
...just because someone with no experience tells you it might work, you're just asking for more headaches... Bill William Rayburn, CET Premium Technologies PO Box 442 Long Beach, WA. 98631 ...
Sony KP-61HS10 When 1st turned on, works normally for 10 minutes. After 10 minutes, video drops out and only sound on. Indicator light blinks 5 times, when tv turned off and then on, it has a green ...
work. Any suggestions? In the convergence circuit, where the amps themselves are soldered to the foil side of the board, may be ring cracked. What you're doing by forcing it to start is causing an arc
work done on the set. I have stated having some faint lines in the set but nothing major. I am wondering if I should get the service manual and try to clean the inside of the unit. I have no TV repair
...of flashing green light before you're able to press the power button - even when everthing is working as it should.. Hope this helps! Bill William Rayburn, CET Premium Technologies PO Box 442 ...
...work. i called another repair man who came to my home and he said it was my color wheel and a new one would cost $1700.00. so far i have spent over $200.00. do you think it's my color wheel or could ...
Question about Panasonic Televison & Video
...internet and other writeups here, I am ordering STK392-110 (2) and will try a replace to see if it works. If anyone knows of another reason this could be happening on only the right half, I would ...
work with and I for one hate burning my fingers on a hot solder tip. You can consider pulling the module and having it sent in for the repair as an option. On a scale of 1 to 10 and ten being the most
598 questions posted
Usually answered in minutes!
1,061 Questions
920 Questions
867 Questions
724 Questions
662 Questions