Flotec Corrosion Resistant Shallow Well Jet Pump 1/2HP, 8GPM "cycles off" Questions

Ad

...off first of course) then check the air in the bladder. Should be a couple pounds less than the low cut in setting of the pumps pressure switch. This should let the pump rest between cycles and stop ...

Ad

...cycles on and off constantly. low to no water pressure .The pressure switch remains in the closed position. Power to pump side of pressure switch good. pump runs 15 seconds shuts off for about two ...

Ad

Question about Little Giant Plumbing

1 Answer

breaks, the water in the verticle section of pipe will run back into the pit when the pump kicks off and causes short cycles like you describe. Otherwise, what type of float? What brand and model pump

Installed a new jet pump for shallow well (gravity feed to pump) - used old pressure tank - after about 4 months pump began kicking on and off constantly when in use - troubleshooting guide suggested ...

How do you set the water well pressure switch so that it does not cycle from low pressure to high pressure? Can you not set it to where you have good pressure all the time when watering the yard? ...

Question about Jet Plumbing

1 Answer

...cycles off. Check valve is new, getting plenty of flow, cycles on and off properly. Everything is normal except the short burst of water back flowing through pump when it shuts off. Any ideas? If it ...

Question about Plumbing

1 Answer

Pump no longer starts I have had this pump for approximately seven months. I use it to pump water off swimming pool cover. o far I have used the pump 2 or 3 times for approximately 1 hour. It cycled ...

Question about Flotec Plumbing

2 Answers

the pump goes on and off repeatedly The pump should only run if you are using water. If you have a leak it will cycle on and off. If it only cycling fast when you're using water, you may need an ...

Question about Plumbing

1 Answer

sump pump keeps cycling on Sump pumps are designed to automatically start when ground water reaches a predetermined point, typically by use of a float system. They are supposed to cycle on and off ...

How do I tell if my bladder is leaking or broken? The pump does not cycle. If water comes out of the air input valve when you push on it, your bladder is probably broken. A heavy tank is another clue,

Not finding what you are looking for?
Flotec Corrosion Resistant Shallow Well Jet Pump 1/2HP, 8GPM Logo

177 questions posted

Ask a Question

Usually answered in minutes!

Top Flotec Plumbing Experts

Brad Brown

Level 3 Expert

19187 Answers

john h

Level 3 Expert

29494 Answers

Renee Knafel-Bullock

Level 3 Expert

404 Answers

Are you a Flotec Plumbing Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...