...kitchen faucet (2400 series) side sprayer doesn't shut off the spout completely, when engaged. Water still comes out of both, when using the sprayer. Make sure the sprayer is clean of debris. IF YOU ...
...series kitchen faucet. Leak around the spout was fixed with a free spout seal kit from AS. Reassembled and no leak but the spout now hard to turn. Suggestions? You have to lube the seals. New seals ...
...series Moen leaks at top and bottom of base hub You can just replace the o-rings. You have to remove the large nut at the base of the spout. I posted a blog post -and a video about me replacing mine. ...
...series kitchen faucet with spray. It now takes a few seconds for the water to come out of the spout similar to vapor lock.. Once it starts the flow is fine. Any suggestions? check the diverter ...
...series when you turn the cold water on you get a shot of cold then hot water until you let it run awhile this happens almost every time you use the sink. single handle kitchen faucet did you replace ...
We have a problem with the cold water flow as it just trickle out. The hot water flow is fine. We have the Combi Faucet 6310 series I would check take apart the cold flex connector and check the flow ...
...series'' I install a new faucet in the kitchen (2 handle) there is adequate pressure for the cold water but not the hot. Can you help both water valves are open fully If you remove the supply line ...
Question about American Standard Plumbing
series kitchen faucet single handle pull-out. The base of the faucet does not swivel side to side. I have had it about 5 yrs. How can this be fixed? Is it a broken part to replace, or do I need to buy
...series kitchen faucet with pull down handle. I need to remove the diverter and have removed everything down to the spout assembly but I am unable to get the spout assembly off by simply lifting up. I ...
kitchen faucet series 4453 if you are having trouble removing the set screw make sure you are using the correct size allen wrench and confirm that it is a allen screw and not a trox screw. After doing
24 questions posted
Usually answered in minutes!
