Porter Cable Cable BN125A Factory - Reconditioned 18 Ga., 1 1/4" Brad Nailer Kit "gun jammed" Questions

Strike Element on nail gun does not retreat back int gun The driver or strike element that hammers the nail into the wood is not retreating back into the gun. It does not want to move at all even if ...

other nail. will shoot one nail then jam. must take nose plate off and remove nail. My Reliant brad gun won't take an 1 1/4" brad. It only goes up to 1 3/16". I have to find more of those myself

...jammed nails, but I cannot figure out how to open it. My fn250b has a small tab/lever just below the nail feeder (with no nails in the gun the lever will be just below the nail pusher).  Push on ...

...is there a cause that this would happen? make sure your using bostitch nails....also make sure the gun is

...gun shut. IAs far as I know I did not lose any parts when clearing the jammed brads, and was very careful not to bend anything. This should have been a simple situation where I clear brads and ...

...jammed nails? while using, the nail struck another nail causing them to go one on top of the other...help?? you gotta get rough with it. The inside of these guns are are real durable. Be sure to ...

driver blade won't retract to shoot the next nail i have the DA250B PORTER CABLE finish nailer ,driver blade sheered off. put replacement kit in and now it will not retract to shoot the next nail , ...

...jammed I removed the nails. the nail pusher is in down position It won't go back up. I've had to remove the plate over the "firing pin" a couple of times (the allen wrenches come with the gun) to ...

...is jammed in my porter cable fcn200 cleat nailer --how do I get it out? Hi, It looks like those guns have a problem with driving the last few nails... so don't let them go all the way down before ...

my gun has always from day one punches out 2 nail and jams up or not, is there an adjust ment for this problem Nailers will double fire or at times, the driver will hit two nails with one ...