Question about Ingersoll Rand Air Tools & Compressors
... It will hold approx 3 gallons. use a good 30 wt and fill up till it in 1/2 way in the bubel i have an ingersol rand p185 and it will crank but then shuts off after about 10 seconds what is the ...
Question about Ingersoll Air Tools & Compressors
...10 alarm Ingersoll rand compressor modell IRN50H-CC The compressor runs but shutts off after 5 to 10 seconds and it shows an alarm vsp fault 10 A VSD 10 fault is bus oscillation. Quickly rising and ...
Question about Ingersoll Air Tools & Compressors
My ingersol rand compressor shuts down on low unload sump check minimum pressure check valve on top of separator cover.
Need wiring diagram to wire pressure switch to magnetic starter. We have a 2545 E 10 V Ingersoll Rand Compressor 3 phase 7.5hp magnetic start wire schematic
i need to download a manual for my ingersoll rand upright compressor, model number 2545. Can anyone help? call I.R and they will send you a manual for a small charge.
...air compressor ingersoll rand 22.8 amp about 45 ft from breaker what wire size would work for this I used to know all this stuff, the hardware store has a gauge guide to show you the correct size, i ...
Question about Ingersoll Air Tools & Compressors
...air compressors sizes 3 & 1 3/4 X 2 compressor No 30T356 it could take up to 30 minutes from zero pressure 10 to 13 minutes from 0 psi to max and auto-shutoff. Tank will be extremely hot, also. ...
Air compressor IHE-10, Make Ingersoll Rand getting overload trip some times during operation. What are the possible causes. check for loose wires..is the overload set right..should be around ...
Question about Ingersoll Air Tools & Compressors
...10 HP motor at three phase. Do you have three phase at your location? If not I would look into getting a single phase compressor. If you do want to get it going I would notify your local IR dealer so ...
40 questions posted
Usually answered in minutes!
69 Questions
79 Questions
24 Questions
26 Questions