Troy Bilt 5.5hp Self Propelled Mower "12a start" Questions

...Start Model 12A-446A011 21"Inch Deck How do I get the Self Propelled Belt back on? You need to remove a pulley to put the new belt on. Jim What size belt does it take for a Troy-Bilt 21" ...

...12A-466M011. I went to start it and pull the cord and it extended all the way and wouldn't retract. The pull cord will not go back in. What to do, please? Some disassembly of the top covers and parts ...

...12A-26M7001 self propelled lawn mower - after sitting for the winter I can not get it started - any suggestions? Joyce Did you leave fuel in it all winter ? If you did it probably went stale.Try ...

...12A-18M7010 will not start. It has an automatic choke. No primer. I've changed the gas, checked the plug, cleaned the carbuerator. What could it be? I bought this self propelled cub cadet about ...

...12A-466M011)? The engine started to repeatedly surge and decline towards the end of the last mowing season. Later, it would start but would eventually quit after a few minutes. Now it will not start ...

...start or even give any response at all, but again it blew out the fuse in the box. The fuse is 25A and the mower is only 12A so that's not an issue, besides, I've used this mower from that outlet for ...

...12a-466m011 that will not start. It appears to have an automatic choke (there is no choke bulb). The mower has not been used for a year, so I dumped the gas tank, removed the carb and dumped the gas ...

12a-466a711 will not start check for water in gas if not squirt a little starting in carb see if start if does rebuild carb

...12A-449T402, 6hp, self-propelled. The Blade Control Handle cable has no tension leaving the handle flopping against the Upper Handle. Both ends of the cable are attached. The cable moves by hand, but ...

...12A-979L401. I recently went to start my mower and the string was broke. But that is not the only issue. The whole top peice where the string is wound all the small metal bands on the top snapped. I ...