Waterway Spa Pump Executive 56 Frame 4hp Dual Speed 2" Intake 2" Discharge  "4hp wet end" Questions

...4hp Dual Speed 2" Take the screws off the outer cover fo the wet end. That will expose the impeller. At the other end of the pump is a small metal cap in the middle. Pry that off with a screwdriver. ...

wet end from spa remove outer cover of wet end (small screws) the impeller will be exposed. remove any obstructions and then free it up by turning it if it wont turn motor may be seized replace cover,

wet end is leaking from the backside. I have a executive 56 frame 4 hp water way motor - PF-40-2N22C. Wet end was leaking at shaft, had it fixed and now the motor won't rotate at all. shaft is free it

...WET END OF WATERWAY PF401A22C-LEAKS- NEED DIAGRAM I RE-ASSEMBLED THE WET END OF A WATERWAY FRAME 56 PUMP(PF401A22C) NOW IT LEAKS I NEED TO SEE A REASSEMBLY DIAGRAM IF YOU CAN HELP. I've never seen a ...

...wet end. I'd advise you to take the pump to someone who can advise you and perhaps consider changing the entire wet end so that you have a new mechanical seal too. If you're in the UK I can possibly ...

...wet end. That will expose the impeller. At the other end of the pump is a small metal cap in the middle. Pry that off with a screwdriver. That reveals the shaft of the motor which has a slot in it. ...

...wet end and the Waterway tag on the whole unit says it's 5HP. However on the GE tag the HP is blank and the amps is only 11.7, which according to what I've been told, makes the GE only 4HP. With that ...

...wet end. That will expose the impeller. At the other end of the pump is a small metal cap in the middle. Pry that off with a screwdriver. That reveals the shaft of the motor which has a slot in it. ...

...4HP Waterway Executive High Performance 56 wet end pump assembly is leaking where the shaft goes to the motor. Is there a replacement seal kit for this pump or do I need to replace the pump? Also, I ...

...wet end out, and managed to turn the shaft to free it. It has rusted up in place. 6 months later it started the loud noise and started getting worse - the motor bearing at the wet end was seizing up. ...