Hayward Navigator Pool Cleaner "turbine install" Questions

...have enough suction and it still does nothing, even after replacing the shoes, it probably needs a turbine kit with "a" frames. if the bearings are bad on the turbine or a - frames, it won't let it ...

install a turbine kit every other season if not sooner. If the wings and shoes are good, check the bearings both on the turbine and the a-frames. If they're good, check steering valve. hope this helps

...in only one direction. you need to install a turbine kit with "a" frames. sounds like your bearings are bad either on the turbine, "a " frames, or both. A set of shoes would be a good idea as

The most likely problem is that you have some bad bearings. You can install a turbine kit with a-frames and it should run like new again. It's a good idea to replace the shoes if they're unevenly worn

...Navigator is moving incredibly slow. What else could be the problem? check the bearings on the turbine and "a" frames. also make sure the left and right pods are tightened properly and the pod ...

...the bearing sits and the bearing should have a spline that will match up with the groove in the turbine and housing. Also, check that the bearings on the a-frame spin freely and all the bearings ...

...seems to be working but moves extremely slow, even when suction is increased. Did you have the turbine and A-Frame inspected or the gear box at the back of the cleaner looked at? Hayward ...

...Cleaners depend on several factors to make them operate. There must be enough water flow past the turbine. Use a vacuum gauge to measure the vacuum in the cleaner hose. You should have 1" vacuum

Turbine kit with a-frames". You should be able to install it yourself. My navigator will work if I turn the pump on and open the valve on top of my filter and let water squirt everywhere. When I close