Filter canister back draining into pool when system is shut off. I have to bleed the air off of the filter canister every time I restart the pool. You have an air leak somewhere draining down the ...
pool/jetted motor, Serial # CA05F49034, Part-7-193262-28, Type-SP, FR-w484,HP- 1.5 SPL, 12 Amps could be its has air getting in when its pumping or the motor bearings are worn out or just dryed out it
...pool water in when started, then - - there is a leak or blockage somewhere on the inlet side - the pump impeller is damaged - the filter is clogged too much and causing back pressure - the pump power ...
...pool inlets and at clean out canister just before pump. Will not nold prime like it use to. Please help! JJF sounds like you have air built up inside the filter when the pump shuts off. the most ...
...FILTER i KEEP TRYING TO PRIME IT BUT IT HAS NOT WORKED i HAVE A hAYWARD S 240 AND A Vari flo I'm just opening my pool on Aug 7, 10 it always happen when we open the pool I try to prime the pump There ...
...filter inlet is leaking from the bottom. I cleaned the o-ring and tightened everything up and still have a constant drip. My filter is almost 5 years old. Any suggestions.... Can I order a new o-ring ...
...pool. The old pump wasnt doing the job so I bought an intex 4000 gph pump. This pump is excellent but there is a problem. The valves dont fit on the inlet and outlet so I bought adapters for them. ...
...filter combo for my easy set pool doesnt seem to be pumping any water. the pump runs but has no suction. not sure what it could be. any ideas? Pump on an INTEX pool is not pumping any water? There is ...
9 questions posted
Usually answered in minutes!
1 Questions
