...put together the skimmer and vacuum....we accidentally lost the guide so we just want to know how all these parts go together and if there's an online owner's manual for it. Here is a link to Intex ...
...put it back together, it will work until you turn off the pump again and then try to restart If the pump is primed and the bleeder valve has no air in it, try turning off the skimmers and using the ...
...together ..turned pump back on and it wouldn't prime.... forced water thru all pipes to make sure there was nothing clogged...all good. then put hose in skimmer port to fill pump housing as to ...
...put it together. Shows it already together but it was sent apart in two boxes! HELP They're all about the same. Skimmer outlet goes to pump inlet. Pump outlet goes to filter inlet. Filter outlet ...
...put back together a lot. Here is what happens, when we change the filter and turn the pump back on it will run great like it has been the past year and up until now, then within a few minutes there ...
...put it back together Try cleaning and lubing the "O" ring or replacing it. Also check the inner support ring if you have one and be sure it is in place. Check the tank when running for water leaks to ...
...Put it all back together and now open the top bleeder on the cartridge cover open outlet side hose first when water starts comong out the bleeder open the inlet hose now turn on pump for 30 seconds ...
...put back together. When I turned on the system the water would not fill back up from the pool. What do I do next??? It sounds like you are sucking air into the pump. Make sure strainer baskets and ...
...Put every thing back together open all bleeder caps except the one at the bottom of the cartridge case open disharge tube first and wait ti'll water comes out the bleeders now open the inlet tube now ...
108 questions posted
Usually answered in minutes!
774 Questions
131 Questions
104 Questions
113 Questions
87 Questions
