my water flow stops with my proline pump after a few minutes and i have to pump the filter to get it going what do you mean by pump the filter? i was having the same problem. the connections were ...
Hooked up a o smith 1/2 horsepower motor and wires touched in back blew the fuse box but now doesn't work is it junk now? it might be good yet, check the wires over good and make sur there is none ...
...gets hot Usually, it's one or two components that get hot - not the entire board. You should never touch a circuit board while powered to "feel for heat". Disconnect from power (unplug, shut off ...
Question about Hayward Pool & Spa
I have a new C48K2N143B1 that I'm replacing the same model that has quit. It came configured for 230 and I switched the tab for 120. Wired everything the same as the old motor and it keeps tripping ...
...plus RS485 cable. I can hear the actuator in the RS trying to turn it on but the pump is dead. One Touch display says Jandy ePump 1 offline. Pump dip switch is set to all off. Set up variable speed ...
When you touch the door it shocks you. How do I When you touch the door it shocks you. How do I fix? First of all, You must be very carefull. You can and will get killed. You must have at least one ...
Jandy one touch, bought the system one year ago. Programmed from 9 am to 5pm. Whenever we heat the spa (3pm)for a short while then filter pump turns off as well. Also after touching the air blower ...
Should the motor end of the pump be warm/hot to touch? The motor should be warm to the touch when operating normally. The pump does use the flowing water to help cool the motor so if it is running but
Question about Qca Spas Pool & Spa
the display panel on my hot tub shows a lock and none of the function keys respond when touched Model number 565 was installed 2004 have read the manual but nothing there about a locked system. turned
131 questions posted
Usually answered in minutes!
