...apart the motor itself in order to keep the shaft from rotating. unscrew the impeller ccw. there is nothing inside the motor that will fall apart so dont worry. to take apart the motor unscrew the ...
...without taking the motor apart ..normally the long bolts that run through the motor housing can be taken out and the pump end serviced without pulling it all apart..send a photo of the
...Could you tell me some shake down steps. how do i check the motor without taking it apart. thanks john sand down any rust stains with coil brillo pad inside motor magnetic part needs to be ...
...motor on- tried to separate there first but will not pull apart (maybe I'm not pulling hard enough) -- there is another set of bolts, maybe eight or so that holds a larger plate on- tried to pull ...
...apart. My husband has the actual motor out, and tried unscrewing the protective thing around the propellers...but it wont come off....any ideas on how to get it off? There is a screw on the center of ...
...4 bolts in back or am I not pulling hard enough. Don't want to dammage anything. Thanks Gary B I believe you have to remove the wet end and the impeller as well to get the motor completely
apart the motor to get to them is a bit much for most people. First find the make and model of your motor how many ball ball bearings there are and find somebody that sells the ones you'll need. There
131 questions posted
Usually answered in minutes!