i wave a powermate 5000 watt generator it runs fine but dosen't charge if i flash the generator brushes it will charge fine until i shut it off whrn i restart it it wount charge again unless i flash ...
Question about Generac Electrical Supplies
runs great but no output unless I flash the field each time I start it http://ezinearticles.com/?No-Generator-Output?-Flashing-The-Field-To-Fix-Or-Troubleshoot&id=6808803
Question about Briggs & Stratton Electrical Supplies
getting 3.6 vols from 110 outlet 6.9 from 220 v outlet changed cap at brush assembly not sure if correct size. no voltage going in or out brush wires. Either the AVR is bad or the field needs to be ...
4000 watt onana generator. Shuts down after a couple of hours. Won't start back for about 30 minutes. The generator has a code that flashes to tell you the problem but don't know what the 3 flashes ...
...portable generator that will start and run fine, but there is no power. I checked the 3 breakers and they are fine and set. I checked the outputs with a meter. out of the 120v output I am getting ...
Question about Electrical Supplies
...portable generator. It is not producing any power ac or dc. I tried to ''flash'' it with a drill but nothing. I have pulled the bottom cover off and checked brushes, ok too. There seems to be some ...
flash field on generator i had to flash the field once about 8 years ago , cant find my paperwork showing which of the terminals should be + or - .the last time i used a 6 volt lantern battery. ...
...internet that show you how to solve both of these problems. Just do a search for No output from a portable power
849 questions posted
Usually answered in minutes!
549 Questions
64 Questions
57 Questions
47 Questions