Wolf Manufacturing Gas Kitchen Range "spark behind knob turning electric" Questions

...Behind the knobs for the right burners are 2 electrical switches that start the spark when you turn the knobs on. One of those switches is bad and stuck in the on position. You have to pull the knobs ...

...IT GAS MOST ELECTRIC COOK-TOPS DON'T SPARK BUT GAS HAS SPARK IGNITERS ON EACH ONE WHAT NEEDS TO BE CHANGED ARE THE SWITCHES BEHIND THE KNOBS OR THE SPARK MODULE CHANGE ONE OR BOTH TO SOLVE THIS ...

...spark via a switch behind each which should disengage when the (any) knob is turn further. One of your switches is stuck. I think you should be able to remove the range-top for access and find the ...

...spark on all four. It won't stop and all knobs are turned to off. It just happened out of no where I wasn't even using it. I turned the fuse off for now and I left it off over night and it still did ...

...to see if it's a problem with the electrode,if not you could have a bad spark module or a bad switch that's behind the knob but i need the model number to see what parts are on your

spark module. If only one isn't clicking you may need a new ignition switch that is just behind the knob. I have also seen wires get pinched,stopping the flow of electricity. It may also be a computer

...behind the second burner knob from the right.. to acess this panel you will need to remove the burner knobs::: then loosen and remove the plastic hold down under the knobs, the contriol panel will ...

spark starter and timer subpanel hanging by its wires. 5. You should now have a sink full of parts that are covered in cooking yuk, leaving you amazed that the oven that you thought was nice and clean

...spark module or the wiring, it was one of the little rotary switches that sit behind the burner control knobs. It shorted out (verified with an ohm meter). The switch is made by State Tool & Mfg. ...

...BEHIND THE KNOB.IF NOT SPARK MODULE IS BAD.HOPE THIS HELPS.PLEASE RATE MY RESPONSE :) jen air ranges use a sw harness. when you order one you get all 4 in a harness. the problem is the sw just behind ...