Goldstar MV-1615 Microwave Oven "fix starts itself" Questions

starts by itself Model smh9187st Microwave will start by itself in baked potato setting- only 2 years old. Do you have a fix? Likely a microprocessor/control panel issue. Microwave ovens that sit over

...dammage the MAGNETRON UNIT, meanwhile you could keap a glass of water in it when it is not used, by the time you fix it, if it starts on it's own at leas you wont dammage the magnetron. Good

starts by itself. open the door, the unit stops. tried unplugging, but same problem. whenever you close the door, the unit sounds like it is running and doesn't shut off. please review this and fix it

...itself on - found it is happening late at night. I have to turn off circuit to insure it won't run all night long. Any solution??? First, do not leave this machine plugged in until it is serviced. If ...

starts on its own HI.although this is quite unusual, it can happen at times when the touch control becomes faulty. simply replacing the Touch control will fix this issue. Touch control will run about

mircowave starting by its self ?You do not even have to in the same room and it just starts running. The touch pad could be giong bad and closing the contact by itself. A new touch pad should fix this

...fix door latch and made it worse. Now it starts upon closing and starts on and off by itself We just purchased this microwave from someone claiming it was new and never used. Never used was true but ...

...not the plastic piece (it was broke and I replaced), but it is the actual sensor itself. What part do I need to order? John, how did you fix the plastic piece behind the start button? That's my ...

...itself all of a sudden. open door only way to stop it, close door it starts again no countdown timer unplugged plugged in same thing. there is just a malfuction in the circute board go and get it ...

...in there to see if it heats up when this happens. If the mwave does come on then u should get it fixed or junk it. With the cost analysis, junk it is probably good. It could be a loose connection ...