...this polycom. how do i get this? previously i had server based access, so that polycom will get the config file from the server. but now i just need to have the config file. please help. Try ...
Sir If there is no sys in home page of polycom. Then how to config to VC. press the ? mark button in the remote and you will get the system option
Question about Nortel Lands Phones
...or up then yes,the tech or vendor can program it for you. If you know how to program look under Config/Lines for Ring
...with your finger, and that will get you into programming. you will select following Manual DHCP config? yes Partial? yes enter the IP address of your system for port #: enter: 7000 retries: enter ...
a PRI and to another over a point to point T1 and the result was the same. Any help is appreciated. configure Bri Board as trunk in MSN config. Create isdn trunk and add bri port to this trunk. Create
Question about Nortel Lands Phones
when a line is ringing it will answer the first line that rang.If you know how to program its under Config/SetXXX/LineAccess/PrimeLine otherwise you need to call a tech/vendor in for this
Question about Nortel Lands Phones
...order to tell you how to fix it. On most Nortel systems you use "Feature Key" **266344 (Feature **CONFIG) . You will need to program from a M7310 phone because you need the 3 soft keys under the ...
39 questions posted
Usually answered in minutes!
90 Questions
28 Questions
4 Questions