Plantronics Discovery 925 Bluetooth Headset "red light flashing 2" Questions

...Red solid light. Low battery Red flashes. Pairing mode: Blue/red flashes for 120 seconds. Missed call: Purple flashes. Double press the call control button to cancel. Ringing: Purple flashes. Briefly ...

...Red solid light. Low battery Red flashes. Pairing mode Blue/red flashes. Missed call Purple flashes. Single press the call control button to cancel. Ringing Purple flashes. Briefly press call control ...

...red light comes on. once disconnected from charger it wont come on Indicator Lights: 1.Headset Status Headset Indicator Light2.Powering on Steady blue, then intermittent flashes(changes to standby ...

...red all the time. I've had it on the charger for the last 2 days and that's all its been doing. I read the flashing red light means the battery is either unchangeable or not making proper

...red light on the base is on and the yellow light is flashing. 2. On the back of the base there are two buttons for the microphone adjustment that can be pressed down.  Press both of those down ...

...red and green flashing lights I've replaced the battery with a new one but now the lights are alternatey flashing green and red and it won't reconnect to my cell While device is on ...

...light will flash red) 3. press and hold the multifunction button for 6-8 seconds until the indicator light alternately flashes blue and red 4. set your phone to find new device 5. Ente rpin '0000' ...

...red light flashes rapidly, repeat for the 2nd unit, they should both go to a solid red light within a few seconds then slow flash blue to show they have paired for intercom use. If this does not cure ...

...light either RED or Green) the charger is bad, or the M2500 Battery is gone. I opened mine up and will (!) replace it eventually, but it is consisted of 2 tiny batteries, about 1/4 as long and same ...

...light and red power indicator light (on the front of unit) start to flash. 2. On the headset, press and hold the listen volume adjust + button and call control button until the status indicator ...