Techko SH1524CP Shredder "fellowes sensors location" Questions

Fellowes W11C: will only run in reverse. Where are the sensors located? There is a switch to put it in reverse. This is not a sensor problem. All the sensor does is detect something in the slot. I ...

my fellowes ps-70 shredder has a light on and it's not working the middle light on the left turns on and the shredder does not want to work. If the shredder is the kind that turns on when you insert ...

...your "bin-full" sensors are bad. a known problem with these shredders. fellowes has come out with modified sensors. if it was purchased within 2 years, it should still be under warranty. hth, ...

The empty basket light stays on all the time Our Fellows C-320 empty trash can light comes on after every use. The basket can be empty and the light comes on machine to empty the basket. Please help. ...

fellowes has had problems with the bin full sensors that sometimes, can only be corrected by replacing them. however, there are two things to check. make sure it doesn't have a bunch of shredded paper

...interlock switch located under center of basket. If niether of these help you please contact us at Fellowes Customer Service

Motor not shutting off in Fellowes Powerhouse C-14 shredder When shredder is in automatic mode and something is shredded, it does not shut automatically. this is an issue with your paperfeed sensor. ...

where is the paper sensor located? Usually the leaf switch located in the middle of the feed slot before the two rows of teeth. Sometimes a bit of paper can get jammed and stop the unit from working. ...

Fellows powershread keeps turning off - says bin is full when its empty a known problem on these models. however, first make sure the sensors are clean and not covered with paper dust. they are ...

Fellowes Shredder C-220 (Auto-on sensor is blind = no shut-off) Problem: Auto-start sensor is ''blind.'' If fed paper in "Auto-on" mode, it runs continuously until I shine a bright light down the ...