hard drive not being found 1 . Shut down the computer. Unplug all cables and peripheral devices. 2 . Remove the computer's side panel. (Cases vary. Some will require a small Phillips screwdriver for ...
...hard drive is installed on a computer system, each drive competes for control of the computer. To allow both drives to work in harmony on the same computer system, the controlling (or startup) drive ...
...hard drive didnt show up as been identified Read this whole post you might want to try the last paragraph first. Take your hard drive out of your computer. In another system configure that hard drive ...
Question about Gateway Computers & Internet
hard drives and you intend to install these drives on the same IDE cable then you can set the jumper on Quantum drive as Master and the Maxtor on Slave.I suggest that you install the Quantum as master
Question about Gateway Computers & Internet
...hard drive I tried to install a used 20gb working hard drive with xp os already installed. to a dell optiplex gx60 Dell. The computer recg. hard drive, but xp wont boot, keeps coming up with message ...
...hard drives come up as non raid in the raid configuration screen. Model MMDOE56G5MXP-OVB First of all, does the Motherboard support RAID? If so, you may need to get into the RAID BIOS and set it up. ...
...you need to configure the jumper settings for your Hard Drive, CD/DVD Drive etc, Please refer to the following document. Jumper Settings for the Installation of Hard Disks and CD, CDRW, and DVD ...
hard drive please let me know ok i need help . When you get an error message relating to hard drive then the fault could be a configuration or a faulty hard drive. 1st go to the BIOS configuration and
...hard drive. (07) Do you have any data that needs to be recovered off of this drive? If so, let us know and we'll help you to recover it. (08) If not, you can use the Seatools diagnostics to write ...
Question about Gateway Computers & Internet
...hard drive is corrupted with Bad sector. Get a new windows XP CD and configure your system BIOS to default setting ( load optimal settings) and configured for IDE drive configuration to compatible ...
27 questions posted
Usually answered in minutes!
697 Questions
487 Questions
417 Questions
330 Questions
336 Questions