Ice-O-Matic ICEU220HA Undercounter Ice Machine "thickness" Questions

How do I adjust bridge thickness on ice o matic iceo500ha4 Adjust the Timed freeze. The freeze timer is an adjustable timer used to control the ice bridge thickness. The freeze timer is factory set ...

ice bridge too thick look at the evap plate to see if there is a ice thickness probe, if there is it should have a screw 5/16 going through it that you can turn in or out you wont the thickness of a ...

ICEU150 bridge thickness time delay to 1 second and the bridge thickness is still to thick The bridge thickness on this model starts with the low pressure cut-in control that then in turn starts the ...

...ICEU220HA2 bridge too thick. Is the time delay relay the "finnish" relay that adjusts bridge thickness? If so, I'm not getting any change in thickness with time adjustment.If the time delay ...

...BEFORE HARVEST CAN'T ADJUST If you have tried to take some time off of the freeze timer and bridge thickness is still to thick then depending on model. 1. Replace freeze timer. 2. Some models the ...

how to make cubes fuller You have to adjust ice thickness sensor it hangs in front of the evaporator at the top it will be white with a 5/16 screw going through it to increase the thickness of ice ...

ice to thick your machine should have a bridge thickness of 1/8 of an inch. you can go to the freeze timer and take some time out to shorten the freeze cycle buy sliding the switches to on and off. ...

...and time it , run it for 18 minuets and force into a harvest. after ice drops check the ice bridge thickness. Bridge thickness should be about 3/16'' the ice dimple must not be DEEPER than 1/16". If ...

...screw on ice maker that adjusts the amount of water that enters the tray. Adjust that for required thickness of ...

...button but does not automatically harvest. Does not open water valve and refill. Remove the ice thickness probe that is hanging at the top of the evaporator plate and clean really good put it