Question about Bissell Vacuums
...hose off but didn't find that it was a easy task took everything else apart and cleaned it still no suction. How does hose come off? First remove the hose and place your hand instead of the hose then ...
...off the hose so the hose is bendy 2 the plastic holder at the bottom of the hose should slide in to the main body and clip in if you are still having problems take off the inspection valve where the ...
...hose about a quarter turn then lift, it should come off to check for blockage. Also check the rear suction port located near the hose swivel for blockage. It resembles a parallelogram in shape and ...
why does it shut off when hose is attached When you plug in the hose the power goes off There may be something blocking the hose, so make sure the hose is clean
the tube over the hose and take the hose sock off at the end. Tie the hose sock securely in place and start pulling the tube over the hose. The sock will slide off the tube and onto the hose as you go
the vacuum to close the hole so I can actually use the hose and tools Some units do not have a close off. Simply connect the hose to the inlet or outlet and use to such up dirt, or dust off components
...off the hose to change it??? Soak the end of the hose it very hot water to soften the end of the hose. Then insert a screwdiver inside the plastic end piece and flex the end of the hose inward and ...
...hose end off. I was careful not to snip too far down the hose end. I then removed the old hose end in 2 halves. I then ran the end of the hose under hot water to soften the plastic. Then it was easy ...
...hose off and see if the light is still on or is it off. If it is off, then there is a clog in the hose. While the hose is off, drop something thru it and see if it comes out the other end. Press the ...
17 questions posted
Usually answered in minutes!
43 Questions
40 Questions
15 Questions
