2002 Toyota MR2 Spyder "front brake" Questions

front. its a two person job you need to have one person pump the brakes sevral times and hold pedal to the floor then the other person needs to loosen the brake bleeder besure not to release the pedal

Changing brake discs Do I need any special tools to change front or rear brake discs you need 10,12,14,17 mm wrenchs or sockets, its easy , take care with fluid hoses

high pitch noise coming from o/s front wheel on a mr2 noise tends to go off when brake applied You need new brake pads and rotor (either resurfaced or replaced depending on rotor condition).

...unreadable - front, engine compartment, driver kick panel box has no cover. Where do I go from here? Thanks. check the switch that the brake pedal hits when you apply the brakes it may be stuck

...front tires. Compress the caliper piston totally into the bore with a C-clasp or piston withdrawing apparatus. Now remove the brake caliper fitting with a wrench. Lift the caliper up until it clears ...

...front brakes. I get approx 1500KM before they start shuddering under braking. are the Turbo brake assembly different to the NA assembly?? Yea they are different! Rotors,Calipers and Knuckles. And ...

...front wheels and then turn which ever wheel that you start with, into the direction of most convenience.....You will see that there are two bolts which are visible, and allow the sliding part of the ...

...front calipers and brake hoses.i dont know what causes them to stick but the brake pedal comes all the way up and the car will not roll freely. i loosen the bolt used for bleeding the brakes and i m ...

...front of car till you find the break in wire Did you verify the "Brake Sensor" from the back of the Brake pedal?, I've had one before (1992 was the year), Let's start from something BASIC! ;). Hope i ...

...front brakes are staying on.do i need a new caliber my toyota mr2 mrk 2 brakes are not right.do i need a new caliber,will another caliber off a toyota do the job. 1.The fault can be differant places. ...