...1 spark plug tower on the distributor cap, faces directly towards the engine. Number 2 faces the back of the engine, Number 4 faces the front of the engine, Number 3 is to the outside away from the ...
...spark plug wire for cylinder #1 and it does not change the idle. I have tested and have power to the injector plug and I have spark at the spark plug. any other ideas? I just rebuilt the engine 1.5 ...
...1-2 seconds. If spark does not occur, proceed to step 3. Check ignition coil, igniter and distributor wiring connections. If connections are secure, proceed to step 4. Check spark plug wiring ...
Question about Toyota Corolla
1 plug, no spark to the rest of the cylinders. now car doesn't start. can someone please give me a hand with this? It is possible that if you replaced the distributor, you simply have the plugs in the
...plugs' wires and coil. remove the spark plug wires one by one.. remember the connection from no. 1 spark plug to the distributor. the wire from the coil is connected to the center of the
...removal please reference this site: ...
...spark plug is hand tight, give it 1/2 turn more. 14. Replace the square block, being sure that the black silicone gasket on the bottom of the round plastic washer does not get bound up on the engine ...
Pulled the #1 spark plug wire to make the car inmobile, and now can't get spark You may have pulled the end off the plug wire or cracked the porcelain in the plug. Check those two things.
...specs for 2003 toyota corolla Toyota do not have a specific torque setting for spark plugs in the master workshop manual,they say "hand tight, plus 1/8th turn"(using a plug socket and ratchet
...1 cylinder to not fire? i want say NO. If the coil not working engine cant run but if you see one cylinder not working but the and engine raining rough and poor it can be plug cable which from ...
1,234 questions posted
Usually answered in minutes!
1,231 Questions
1,240 Questions
1,236 Questions
767 Questions
792 Questions
