1992 Toyota Paseo "remove plastic valve cover" Questions

remove the plastic rock gaurd under engine. Remove power steering belt and serpentine belt. Remove upper and lower timing chain covers. Before you remove the timing chain covers I would turn the motor

...remove oils and greases. Do not use a cleaner on plastic and composite covers. If an adhesive is required, apply it to the mating surface of the cover. If the gasket uses mounting tabs or the gasket ...

...remove the plastic cover attached to top of valve cover,once removed you'll see where coils drop into cylinder head through valve cover.remove and plugs (5/8 socket)sit down below coils. if it's an ...

...Remove the pipe. 4. You should be able to see the small chrome pipe on the end of the PCV valve. However, the PCV valve is completely surrounded by a plastic collar/shroud, part of the plastic valve ...

...remove the plastic spark plug wire router/holder on the front valve cover to gain access to the two hidden screws. There is a outer cover that can be snapped off. The main block that holds and routes ...

...remove the plastic cover with lexus logo using hex 5mm key 2 bolts , unplug 3 spark plug wires ,loose all 10mm bolts on valve cover , to rear engine valve cover remove before the manifold intake and ...

remove the engine cover (big plastic thing on the engine) Now the PCV is that piece of plastic sitting in the center on top of your valve cover. Just pull it out and replace with a new one and reverse

remove the plastic clips to pull the air intake tube How do You remove the plastic clips to pull the hose from the air intake tube that goes to the valve cover. I want to remove the top of the air box

...Remove Plastic Spark Plug cover, and remove coils (leave plugs). Remove all Bolts from inside plug cover (x8) and 9 from the outside (the last one is from behind the timing belt cover. The rear ones ...

...each cover,they can be removed by prying up on them with a small screwdriver.then remove the 10 mm bolt and the large plastic cover.you will then have to remove the coils,the plugs will then be ...