2000 Toyota ECHO "difficultly replacing spark plugs 2001" Questions

...spark plugs, plug wires and air filter. Car is difficult to start after driving. Sometimes will stall when excelerating at stop signs, stop lights or cross streets. Have you tried replacing the o2 ...

...spark plugs and wires on a v6 mazda 2001 All you need is a deep socket that is the right size to fit your spark plugs and the new set of leads. Spark plugs: remove the spark plug end of the lead, use ...

replacing spark plugs where or how do I find the spark plugs in a 2001 cadillac deville dhs Changing spark plugs in your Cad is not an easy thing. I tried it using the chiltons manual and it took five

...spark plugs and found there was oil on the passenger side front 3 coils (I am unsure of the numbers) the oil was completly covering 2 spark plugs and half way up the third Hi bravo956 i also have the ...

...2001 engine hard to star when cool The spark plug and cable 2 month old, it was runing perfect, star and go, no problem. after I spray with engine cleaner and hoses with water the engine hard to star ...

spark plugs 2001 dohc engine it's not real difficult but you will need to move the plenum out of the way to get to the back plugs.. Might not be a bad idea to replace the plenum gasket but in

...plugs & wires. Car was driven daily. All of a sudden just didn't start no more. I was told it could be the coil or some crankshaft speed sensor. My problem is instalation. Are these difficult to ...

...plugs to see if you have spark since that's easy enough to at least verify.Pull the plug,plug the wire back on to the spark plug,hold the little plate of the spark end up against the engine block,and ...

...spark plugs, spark plug wires, fuel filter. the car will start fine in the morn. but after driving and going to start again it is difficult to start. check your catalitic converter. check the ...

...spark plugs, coil packs, cleaned fuel injectors and replaced catalytic converter. What's left to do Take it to a dealer and let them check it out by plugging it in then checking the mapping of the ...