1999 Toyota RAV4 "replace tail light assy" Questions

...tail light assembly in place. Remove the 2 screws and pull our the assembly and replace the bulb. Duh....I thought with Toyota engineering, they wouldn't make replacing a bulb a major project. Thanks ...

...to change lighbulb in right rear tail light of 2003 yukon open tail gate remove 3 either torx or phillips screws remove light assy remove 3 more screws to get circuit board off light assy replace ...

replace/fix it? The tail light is usually a bulb with lower wattage, so it won't glow as brightly as the brake and turn lights.. There should be one or two other bulbs in either of the two tail assy's

...replace the tail light cover on my 2002 nissan sentra?? I bought new tail lights ( not the light itself but the lens or cover i guess ) and i can't figure out how to remove the original tail light ...

1997 Tail light don't work on my Honda accord Ls 1997 check the brake light switch, it is located at the brake pedal... or check/replace bulbs.... check connector, sockets in the tail light assy..

how to replace tail light for nissan altima 2003 you will have to remove the bolts inside the trunk the light assy will come out and you can then replace the bulbs and replace the taillight assy.

...Tail light assembly seems sealed. Is there a trick to changing the bulbs or is this a major endeavor? Move trunk interior inside fenderwell. There are 4 retaining nuts that hold the outer light assy. ...

...replace the rear tail light assembly for my 2003 Buick Century (left hand, drivers side - OEM part #5978575)? open the trunk and unscrew the plastic nuts on the back side of the light assy and ...

...with the rear tail light assy..most of the wiring inside the assy. is internal of plastic... need to take off complete assy remove all bulb and ohm out... or just go to junk yard and replace ...

...tail light assembly. you have to replace the whole assy. There are two screws that hold the assy in, they are both covered by white cable clips. The clips just pull off and then you can use a 10mm ...