oil and water mixing Sorry to say this almost certainly means your cylinder head gasket has failed. Cylinder head off, replace gasket, depending on the car replace cylinder head bolts too!
...Cylinder Head Cover - REMOVAL & INSTALLATION procedure... 1. Remove the air cleaner assembly. 2. Disconnect the PCV hose(s) from the cylinder head cover. 3. Remove the nuts and washers. Lift the ...
cylinder head what is the sequence to remove and replace a cylinder head on a vauxhall combo van 1996 17D please ignore the car selection as vauxhall is not on the list to select from Mate .I am not ...
...cylinder head. if this happens, water will not circulate properly in your engine thus the vehicle will shutdown due to over heating. what to do: 1. replace head gasket. this is quite not a DYI fix ...
...cylinder head.disconnect fuel linesto the fuel pump.romove bolts that attach pump to cylinder head.romove the fuel pump.Instalation is reverse of removal.Mke sure you clean mating surfaces of old ...
how do you check a cylinder head if it has a crack if cylinder head is cracked Check your oil and see if it is a creamy white colour if so you probably have a cracked head or could be just a gasket
water in all 4 cylinders i just replaced my head gasket thats was blown .put everything back together and now i have water in all 4 cylinders.94 toyota 2.4 oooo, not good, Head needs to be checked for
...Any recommendations on taking the engine apart to replace them? Anyone else have this problem? put new cylinder head gasket cover.clean the engine,if its check the cylinder head boltes and
head gasket if the back two cylinders quit firing is the head gasket blown? Hi there, answer to Q is it can be possible....Solution, do a compression test to check if all cylinders have same ...
ISUZU KB TURBO 280 TORQUE SETTINGS HEAD CYLINDER HEAD CYLINDER TORQUE SETTINGS http://olybrake.com/pdf/fel_pro_torque_specs_guide.pdf
1,086 questions posted
Usually answered in minutes!
914 Questions
525 Questions
407 Questions
393 Questions
140 Questions