1991 Toyota MR2 "engine belt" Questions

Ad

...belt with a new one might be best to do from under the vehicle. There is a plastic cover panel under the car that has 3 bolts to remove it and then access is much easier to that side of the engine. ...

Ad

...belt swap. I DO THAT on 3A engine so that i don't bend the valves more. see? or i fails by hand , i now know the valves were bent BEFORE all this. see? (i try hard, NOT to make it worse, I DO) the ...

Ad

...engine a bit. Remove timing belt cover.After you remove the valve cover gasket, place a file or something in the grooves at the end of the cams to stop them from turning and loosing timing. remove ...

Question about Toyota MR2

1 Answer

...the belt the best diagram you will need for this job is the repair manual on that cat and engine. get that first and read up a little and then you will have a good job to look forward to .i

Question about Toyota MR2

1 Answer

...belt or one with a tooth or two missing. Since your engine is not an interference type, damage isn't awaiting you as with many other cars but if the belt has more than 60000 miles on it, it's time to ...

...that if rotor is moving when you crank the engine, because if the timing belt has broken it will not move and it will not send spark to the plugs.You would need to change the timing belt! Good

...belt 5peed manual this is something that i would call a toyota dealer call them and tell what size your engine is and the year of your car and they can help you with this i am sorry i was not able to ...

Question about Toyota MR2

2 Answers

engine compartment below and out of the way of the alternator. (You do not need to pull it completely out of the car.) Remove the outside passenger side cowl with 2 screws. Loosen the tensioner on the

Question about Toyota MR2

1 Answer

...belt and replace cam cover and rocker cover, if when you try to turn engine over you hear tapping noise, turn off immediately and ask garage to set timing up for you but remember to inform them of ...

Question about Toyota MR2

1 Answer

engine up, valves were fine seals were good. closed it up and car was running the same....clicking and bad power loss. the next day i started it to take it to a tech and it shut off, it wont crank, or

Not finding what you are looking for?
1991 Toyota MR2 Logo

302 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Toyota Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

ROBERT GARCIA
ROBERT GARCIA

Level 3 Expert

926 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...