1989 Toyota Pickup SR5 "axle" Questions

Ad

rear axle bearing lock washer and nut coming loose Rear axle bearing lock washer and nut on a Mitsubishi Triton 4x4 ute coming loose has been replaced by a mechanic once and myself two times after 6 ...

Ad

Question about Toyota Pickup

1 Answer

rear axle bearings how do I get the backing plate off , when I'm trying to replace the rear bearing ????? this is a 1986 toyota 4x4 pickup rear axle bearings.. manual trans. There are 4 bolts for each

Ad

Question about Toyota Pickup

1 Answer

I need to remove my rear axle shaft I have removed the cover and I am now baffled on how to remove carrier pin and then side gears to get to clips to pull the shaft. I have worked on my chevy and ford

Question about Toyota Pickup

2 Answers

front differential diagram 4wd is not working upon further inspection I noticed that the axle on the passenger side is sliding out from the differential. Is there a lock ring or pin that holds the ...

Question about Toyota Pickup

1 Answer

1991 toyota pickup driveaxle removal . 4wd stuck. there are 6 bolts to remove that hold the drive-axle to the front end housing, you then need to remove the hub and the gears inside, you will then ...

Question about Toyota Pickup

1 Answer

how do I replace the rear axle Is it rear or front wheel drive? Rear wheel drive. take of the wheel. Behind the hub there should be bolts that hold the axle in place. Undo these, then yoy need ...

...noise in the rear end Goes away when I put foot on clutch pedal Could be problems with the rear axle; final drive carrier bearings or crown wheel and pinion or the pinion bearings. Each of these ...

...the axels on the front and it still does not work. HELP!!!!!!!!!!!!! Why did you replace the axles. Just wondering because I was about to buy one, nissan ,not an axle.. I would say maybe ...

There is a part located right over the rear axle that the rear brake lines attach to. This part is leaking fluid and the local auto parts stores have no idea what the part is. What is the name of this

Question about Toyota Pickup

1 Answer

how to replace right rear wheel seal Remove wheel. Remove the 4 nuts,through the axle flange hole,that retain the axle bearing and shaft into the housing.You need to use a socket and extension,for ...

Not finding what you are looking for?
Cars & Trucks Logo

498 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Toyota Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

ROBERT GARCIA
ROBERT GARCIA

Level 3 Expert

926 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...