1988 Toyota Pickup "fan belt" Questions

...belt pulleys to replace the fan belt? There is a belt alignment/holder over the belt pulley but I can't see if it is removable. How do you remove the alignment/belt holder off of a 1988 Toyota

fan belt how to change the fan belt Hi leo,maybe you can read this article ,it can tell you ,how to replace fan belt ,good luck!

pump pulley. remove the radiator lower fan shroud. It just clips in. pull the power steering belt around the fan and out of the engine compartment then do the a/c belt. That is the best way I know how

...belt drive with a pulley held on with 4 bolts. So, yes, the water pump can be replaced without touching the timing components. :-) Yes you can. Radiator, belts, pulleys and hoses come out. Remove fan ...

...fan belt. My wife had our fan belt replaced about 3 weeks ago. When I start it, it squeals for 2 - 3 seconds then stops until started again later. It is a Nissan truck w/ only 61,000 miles. In great ...

...belt, not chain, and its behind the fan motor and all those belts, behind the black plastic housing. You have to remove all of your hoses and fan blade, then housing bolts, to see if its your timing ...

my fan belt just broke what do i do to replace it? bring to garage to replace fan belt

...fan/alt belt slips off after replacing false water pump and fan blade check all pulleys are in line,same width turning evenly,check belt for tention (push with finger )should not be more than a few ...

...it is? remove the alternator, power steering and fan belts as they will no effect you car when engine is just running, the water pump runs of the timing belt, if it still squeals it you water

...fan belt on a 1984 Nissan datsun Pickup? #1 loosen the Alternator drive Belt adjusting bolt, and remove the belt. Install new belt,tighten the adjusting bolt to give you the propper belt tention. At ...