2004 Toyota Sequoia "need change turn" Questions

...need to checked at the dealer. The MAINT light is reset with the little stem button you use to change the odometer from odo to trip 1 or 2. Set it to odo and turn the truck off. Push and hold the ...

...the other hand on the steering wheel move it both ways (left and right) gently! if problem stays, means you need to change the switch assemb. may be a kid inserted some thing in it!! or theft

change with the key off press and hold the trip reset button in the instrument cluster while you turn the key to the run position. The display will turn to dashes and then they will start to disappear

...to turn off again. On some vehicles, the knob will be inside the lever assembly and this would mean that the entire signal arm will need to be changed. The arm should only be held in by 3 or 4

After changing battery cable , my seqoia turns off while driving Your immobiliser needs to be reset....consult your owners manual or nearest dealer

...need to change your signal/cruise control device. You may try an auto recycling center. Remove the positive wire from the battery remove screws at the back of the airbags. Don't worry, you disable ...

...change i'm having a problem with the vehicle skid control system the ligth indicator come on and the vehicle loses engine horse power and feels like it wants to stall Take it back to who did the ...

need to change. Most of these parts listed run off your ECM. The ignition system is a very complex system. It is rarely, but they do go bad. If you believe that the computer is to blame, make sure you

...need to see if the blend door on the inside under the dash is moving from hot to cold when you change the dial for the temperature. This is usually due to low pressure which is caused by ...

change among 4 options. No matter how i do this, the door locks do not respond. I don't know if they are controlled by the same module, but seems logical. pressing the drives side door lock does work.