1999 Saab 9-5 "brake pedal sinks floor stop" Questions

...brake peddle almost to the floor and it does not stop.The mechanic says it is the master cylinder. Possible or not likely? If the pedal has sunk further than usual or gradually sinks then usually a ...

brake pedal sinks 1-2 inches while holding 1985 Toyota 4x4- while at a stop, with brake pedal depressed- brake pedal slowly sinks 2 inches to floor. Sounds like your master cylinder is shot. Go to a ...

...trooper brake pedal goes solid half way down and braking very poor your master cylinder is gone. when stopped apply pedal and hold let up slightly then reapply if pedal sinks to floor master is ...

brake pedal to floor and fluid empties within 1 day. Is it the master cylinder or the line? check all brake lines and wheel cylinders for leakage. if no leaks its probably the master cylinder. symtoms

...brake problems i have a 2000 isuzu rodeo and when i step on brakes as it is slowing down before stop i here brakes squeeking and the brakes release and continue to move. i have to release brakes and ...

...the next they dont. If one time the pedal if firm and stops next time pedal sinks to floor no stop replace master cylinder.If pedal always low check fluid level if empty you have leak in brake ...

...brake pedal on 95 Chrysler LHS Got new front pads & rotors, replaced master cylinder 3 times, bled system multiple times, but brake pedal still needs to sink nearly to floor to come to full stop. ...

...brake pedal travel a bit, but every first step, the pedal sinks low. The T6 pulls strong, but now I am afraid to push it because of the fear that the brakes may not be able to stop the car. You have ...

...brake pedal will slowly sink to the floor. On early 2000 vintage Chrysler products you need to check brake lines as they have been known to rust (and fail catastrophically) my guess you mean? pedal ...

...your brake pedal could be touching a bare horn cable that must be some were on the car floor or outside the car . You will have to check inside and out side for a bare wire next to the brake