1996 Saturn SL "temp sensor sl1" Questions

...well what would cause this? Internally leaking ****** fluid pump, clogged ****** filter,temp sensor not reading eng temp,****** taking in air. There could be so many reasons. Better see a ******

SL1 FAN DOES NOT WORK. test fan by unhoohing plug, run power and ground wires from battery to fan if fan runs then fan is ok, if not then bad fan, check fan relay and coolant temp sensor, if fan is ok

...at 2000 in park drops to 1000 in drive i replace the iac and tps how do i reset the idel air control or does it reset on its own . You need a coolant temp sensor my 99 did the same thing.Good ...

...sl1 It wont turn completely over unless you spray the either/starting fluid in it. Now that has stopped working as well. Im hoping its a fuel filter. Any suggestions would be greatly appreciated. the ...

...DRIVING THE INDICATOR SAYS IT IS HOT AND NEEDS WATER IS TI THE TEMPSTAT OR DOES IT NEED RADIATOR FLUSH Make sure the fan temp sensor is working, that is does the coolant fan come on when it gets

...temp sensor? Be sure your coolant level is OK first. When a water pump or other cooling system part is replaced air blocks in the system are not uncommon. If the engine overheated, this could have ...

Temp Sensor), it is a sensor on the Driver side of the engine with a 13MM Deep Socket. The sensors were made of Resin Tips, and were prone to failing and cracking after a period of time. A replacement

...temp sensor tells the computer how hot the engine is, and when it reaches 220 degrees the computer grounds the relay providing power to the fan motor.You would need a meter or a test light and the ...

...temp sensor it is a 98 saturn sl1 More specifically you will have trouble starting the car. When the ECTS is bad the PCM reads it that the engine is at -40F. This means that it will dump tons of fuel ...

...temp sensor is on the driver's side of the engine in the head. If you remove the lid to the airbox and lift the intake tube, you will be able to reach it easily. To remove the connector, you just ...