2002 Kia Sportage "timing marks 1" Questions

1 wire is. remove the cap, and turn the rotor pointing to the mark that you made. reinstall the cap and the sparkplug. and it should be timed. if the sproket was removed then it could have been placed

...timing marks I think it may have slipped time I have what i think is the nbr 1 piston on tdc, it is the one closest to the crank The right side of page 6-20 can help you finding the right markings of ...

...timing marks. If the No. 1 idler pulley uses a green tension spring, slowly turn the crankshaft pulley 1 7 / 8 revolutions, and align its groove with the mark at 45 degrees BTDC (for the No. 1 ...

...timing. The #1 cylinder is in the up position and the timing mark on the crank is at the timing mark. Need to know how to position the cam gears. You need a factory repair manual. Don't risk ...

...the cam gears from the cam shafts and need to know which way they go back on the cams. get number 1 cylinder all the way up then line up the timing marks on the gears with the marks on the ...

...timing marks at tdc and when fired up no 1 cylinder is not firing at the right time..... all the diagrams are on this ...

...sprocket. If you check the timing marks everything will look good. To check this you need to put the timing marks on TDC cylinder number 1 and make sure that the piston is truly at top dead

timing beelt broken while driving 2002 Kia sportage. Do I need to make sure Cylinder #1 is up top? Cylinder one would probably be at TDC when you get the marks on the gears lined up.

...timing belt with little to no effort if you can the belt is broken now since you already crank it get a crayon and mark it crank the engine did that crayon mark move? if it did its a good thing and ...

...1 and a half. what do i do or what can my mechanic do? Timing issue needs to be checked out first with a timing gun and maybe adjusted accordingly, There are mivor maintanences that you can do like ...