...increase the engine rpm up to around 3500-4000rpm before trying to engage 1st gear. Basically the syncro is for engaging the gear as you are coming to a stop or going very slow . Check the drain plug ...
...increase but due to possible induction hose from turbo to manifold ? this hose may? be collapsing /sucking together thus creating air restriction to engine if this does happen ? then the symptom of ...
Question about Hyundai Tucson
...speed manual. At 70mph rpm used to e 2500-3000. Now it's 3000-3500. Has about 150,000 miles. One owner. Increased rpm in same gear at same speed. Honda CR V 2003 5 speed manual. At 70mph rpm used ...
...increase dramatically as the rpm goes up. In most cases a manufacturer will use a smaller diameter rotor in a 2 pole (3600 rpm) rated motor than they do in their 1800 rpm (and lower rpm). If the ...
...RPM begins to increase and the torque converter begins to slip less and less the more the engine RPM increases. The car moves. But even at cruising speeds the torque converter slips slightly. Engine ...
Question about Honda Cars & Trucks
...increase RPM's under a load. I've checked linkage, replaced circuit board, brushes and serviced it. I did not test the Idle Control Solenoid as it does not fall under the desired RPM's at idle. I ...
...rpm. I suspect that the idle-air control motor has seized and can no longer automatically adjust the engine's idle speed. This part is also responsible for slightly increasing idle speed when the ...
rpm increase it shifts back before the rpm adjusts. You can override a cruise control in this situation by simply pressing down on the accelerator to maintain the power setting and road speed and when
RPM's increase with speed increasing When I am driving I can hear the engine reving up, and my speed is not increasing. Check your transmission Fluid. Make sure your have the proper level in there, ...
Question about Hyundai Tucson
...increase the rpm idle (pt cruiser 2008) using one autolink Autel AL 319? I need to increase about 200 rpm no it is a scanner. the idle speed is controlled by emc based on air temp engine temp engine ...
992 questions posted
Usually answered in minutes!
538 Questions
117 Questions
101 Questions
76 Questions
67 Questions