1995 Geo Tracker "welding aluminum" Questions

1995 Geo Tracker 4x4 Heating and cooling cable came loose from the bracket. What is the best way to resecure the cable? There should be a bracket that has either lost a bolt or has broken. You have 3 ...

...Welding aluminum requires the use of a mig welder, and inert gas called argon. The machine itself cost 500 to a few thousand dollars. I have one in my shop just in case I need to weld

Welding Aluminum as all the Import Blocks are Aluminum. Some good Mechanics can Weld this Back on Well enough to Use the Hole again for the Bolt. I would make some Calls and see if you cannot Find one

oil pan has a crack in it, and I would rather not pay $250.00 to replace it what is the oil pan made out of on my saab 900s? aluminum? magnesium? can I weld it? it will stay MG if it's mangesium and i

how do you fix heater intake manifold hole to big cut to much off inside intake hole? If you know someone that can weld aluminum, you can build up the welds and mill it down. But its not as good as ...

boken trunnion 69178 trunnion mounts to table and ia used to change angle I used JB weld and a 4" piece of 3/4 X 3/4 x 1/8 aluminum angle .I used the JB weld to weld the broken tabs back on.Make sure ...

broke drain plug can drain oil drain plug wont come out tried hitting with torch then tried jb weld but bot snapped now dont knoew what to do Oil Pan on Motor?If it is steel, remove the pan & ...

...etc that could fabricate a new section and weld it in (mind you aluminum welding is not that easy). Basically - the short answer is yes but it will cost you, you'd be better off replacing the

how do I replace my oil pan My oil pan has a crack in it and it is leaking oil, what do i do to replace my oil pan and is it hard to do. clean area real good fix with jb weld depending on how bad the ...

coolant leak on 2005 f150 4.2v6 on the front of the intake an aluminum hose coming out of the intake broke off do i have to replace the intake yes, or remove it and have the damaged area welded up.