2005 Chrysler Pacifica "cause wheel sensors malfunction" Questions

wheel speed sensors need to be replaced together. If you just replace the drivers side or passenger side, the light will come back on. If you are experencing ABS shutter, or when you apply the brakes,

P0501 code? P0501 - Vehicle Speed Sensor (G22): Implausible Signal Possible Causes Wiring/Connectors from/to Vehicle Speed Sensor (G22) faulty Wiring/Connectors from Transmission Control Module (J217)

that is the case, and if it is, which wheel speed sensor is the problem-child. Also note that there are several other parts that can mess-up and cause this, but wheel speed sensors are the most common

...wheel speeds Cause: Trouble code(s) stored in other system(s) Nissan P1605: AT diagnosis communication line - communication malfunction Cause: Wiring, TCM Saab P1605: Engine control module (ECM) - ...

...sensor malfunction. The problem is when front wheels spinning, the rear wheels don't move. This caused the computer to think the sensor malfunctioned. Apparently, only dealers and a handful of ...

...sensors are in the wheel bearings when a wheel bearing goes out grinding will come from front wheels and will ruin abs and traction control sensors causing the malfunction. Most likely by your ...

...code p 0446 refers to evaporative emission (EVAP) system---vent control---circuit malfunction===causes --wiring---EVAP canister purge valve ---ECM replace the purge valve code p 0453 refers to ...

...cause is a front wheel speed sensor malfunction.You will need a scanner to find out which one does not read correctly and then remove the sensor and clean the boss of the hub from rust,then replace ...

...wheel sensors and malfunction of brake signal from the wheel sensors, the speed sensor on this year comes off the back of the rear differential and is a magnetic pick up, but you need to have the ...

...false signal that the wheel is sliding or going slower than the other wheels which can engage the abs system or cause the abs light to eluminate. Have your mech check the speed sensors and abs