1996 Honda Passport "scanner code timing belt" Questions

timing belt excessive pinging sound, similiar to lifter noise run scanner for trouble codes , check timing, try octane booster

...come up on the scanner any ideas of what to try next ? you should check your compression ,and timing belt .If your engine doesnt start your check engine light wont go out until the engine cranks ...

code scanner reads crank and camshaft sensors are failing .Is the timing off or is the sensors bad .ran great before chaging the belt at scheduled maintenance time to replace Probly the belt is off by

...timing belt replacement at 100,000 miles. might be 180 out of time run scanner for trouble codes, some auto parts stores will do this for free,check timing, will need to disassemble The odds are ...

...Also check that you haven't accidentally disconnected a sensor or left something unplugged. If it all appears to be correct visually, get a code scanner onto the ECM and check for error

...timing belt tensioner because bolt had broken. Runs very well when cold. When warm starts misfiring. I have a scanner. Runs well in closed loop mode, runs well in open loop until temp reads over 205 ...

...scanner,or code reader,then if it persist,have the mechanic recheck the alignment of the timing.If the belt had jumped,or broken ,then there might be some valves bent,if the engine is running ...

...scanner would read such. Hi.. On your problem with the Caravan. If you Have replaced the Crank and Cam sensors. And the Code Cam/Crank Correlation sensor. Is found. Normally this code is present When ...

...scanner and go from there. If a timing belt is broken, open timing belt cover to check on the belt. If your belt is broken and crushed apiece, you may have to rebuild the whole engine as it's an ...

code reader may not have the correct protocols installed to read the GM system Generally the cheaper scanners read European ,Asia or American manufacturers and even the scanners that read jeep may not