1997 Mercury Grand Marquis "1995 gear" Questions

...1995 grand marquis ls Gear in motor stripped or regulator more than likely the plastic gear in the motor has went out. you could easily but a new motor or take the old motor out and remove the one ...

1995 Mercury Grand Marquis---speedometer does not work I ahve replaced teh VSS, and tested for voltage @ the back of the cluster. Replaced the head, and still not working. YOU COULD HAVE BROKEN ...

95 gran marchis trany; shifting problem shifting out of 1st to 2nd gear, then 2nd to 3rd gear;also when i manually shift ,2nd to 3rd it kinda misses, then catches.Down shifts no problems The ...

...gear it make a dragging sound why grand marquis 1995 YOU NEED YOUR TRANSMISSION SERVICE, FLUID HAS TO BE FLUSHED AND FILTER REPLACED. YOUR CAR PROBALLY A LOT OF MILEAGE. TRANSMISSION FLUID FLUSHING ...

Window motor works but window don't go up or down the gearing is shot, buy a new regulator and pay an auto glass shop to install it. new regulators can be had at parts stores and on eBay. do not get a

i could not get my car in gear so i forced the shifter and now i have no brake lights i checked the fuses and there ok can you help Lok down under your dash at the brake pedal lever. There is an ...

...1995 Mercury Grand Marquis. I got new inner and outer tie rods done,new stabalizing pins, new gear box and pitman arm,new roters and pads.ball joints greased,front end alignment. i see you have ...

I have a 95 mercury grand marquis when I try to accelerate it acts as though it can't find the right gear. It did this once before and it was a vacume leak but that does not seem to be the problem ...

1995 Mercury Grand Marquis Suspension I can feel every crack I roll over. I got new inner and outer tie rod ends,stabalizing pins,gear box,pitman arm,roters and pads,ball joints greased,and front end ...

only drivers window works is there a fix think gears are bad for pulled pass door panel and can move window up and down by hand cable intact motor just makes clicking noise nylon gear inside regulator