2004 Jeep Grand Cherokee "wrangler start faulty loose" Questions

Ad

Question about Jeep Grand Cherokee

1 Answer

wrangler check engine light check engine light was coming on then going away.ran fine.now stays on and starting to run rough on acceleration. gauges still read good. If the light was flashing when it ...

Ad

Question about Jeep Grand Cherokee

1 Answer

start, the battery terminal connections is loose or corroded. Battery faulty or discharged, if the cable are clean and tight on the battery turn the key to the ON position and switch the headlights or

Ad

Question about Jeep Cars & Trucks

1 Answer

...wrangler wont start jeep wont start, cranks over good, changed crank sensor, removed fuel pump tested tests ok no spark no fuel gauges dont work Jiggle the wire connectors going in to the computer ...

...wrangler won't start periodically I just replaced the alternator and the battery is only a few months old I had to jump it last night and while driving the lights were flickering and the radio would ...

...faulty gas cap, or something else. P0456-EVAP LEAK MONITOR SMALL LEAK DETECTED (.020)All symptoms listed above are diagnosed using the same tests. The title for the tests will be P0442-EVAP LEAK ...

...Start. Replaced FP. 2007 Wrangler Unlimited - Died one day last week. Checked fuses, etc. Would crank but not start. Started and ran while spraying carb cleaner in intake, indicating PCM functional, ...

...Wrangler jerks and rpms jump like not getting gas When i drive it jerks pretty hard and the rpms move while it does this. I thought it could be the fuel filter but i replaced that and it still jerks ...

Question about Jeep Grand Cherokee

1 Answer

...faulty coil. Check the coil too. Be careful when you check all of this. Make sure your wires are in great condition as you can get electrocuted. If this checks out, check your distributer cap for ...

Question about Jeep Grand Cherokee

4 Answers

faulty and put the light on. In my reference book on codes OBD-11 P2 the code quoted refers to nitrogen oxide sensor bank 1 circuit malfunction causes wiring NOx sensor or heated oxygen sensor 3 bank1

...start. First check the battery you may have fried one of the cells this would have made the pop sound, take the battery out to have it checked at a parts store, Also do this check if the battery is ...

Not finding what you are looking for?
2004 Jeep Grand Cherokee Logo

3,696 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Jeep Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

john h

Level 3 Expert

29494 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...