2004 Jeep Grand Cherokee "flex plate" Questions

...flex plate? (TC flex plate to fly juncture) seem like a torque reaction , caused squeak, ( i cant hear it so...) the mounts, spray them all with silicon spray, try that first before a new $2-3000 ...

...flex plate is bad or its bolts loose. is car 4wd or 2wd? we cant guess that either and matters. see this link , all parts on car are there with full graphics. so what do you really have. the 42RE? ...

...over rumble strips) when engine gets in a strain; mostly occurs between 70-80mph. You can disengage the overdrive and it will stop. It's an inline 6cylinder your flex plate inside your trans is ...

...clutch component, or a loose flywheel--in any case, pull the transmission. If automatic transmission, the torus assembly or the flex plate may be loose or damaged. Again, pull the

...around corners. its a safty devise. look in your owners manual crack in flex plate...sensor thinks it is a knock....computer retards spark...lost power...floor it...computer advances spark...more ...

flex plate which would be great considering. but its pretty loud to the point i dont wanna start it long enough to check with screwdriver and narrow the sound. it also has strong ticking sound towards

...the bolts on the flex plate,they could of backed out and be hitting the torque conv. or the converter itself isn't sitting in the whole way.Should be 1/2" from the outside of the tranny to the

...hearing the problem, best guess is a cracked flex plate (flywheel). Transmission needs to be removed to get to it. Before doing anything though, have an experienced and trusted tech look at it

...have to change the flex plate or flywheel from the old engine. Be sure to double check this stuff. Also the engine mounts might be different but they bolt on so you can change them with the old

...needs to be removed to get to it. (driveshafts, transfer case, transmission and trans converter as well as flex plate to be exact) Big job and expensive. There is no optional "work around" on