1989 Cadillac Sedan DeVille "fan not working" Questions

cool en fan dose work hot wire coolant fan, if coolant fan works, you have faulty engine coolant temperature sensor, or you have faulty coolant fan relay.you can use your climate control panel to ...

...working fan in the first two steps there is generally a small sensor screwed into a head and when the coolant reaches a certain temperature that sensor tells the relay to turn on the fan. so my next ...

A/C fan does not work I just got a 1995 Caddy DeVille. The A/C works, I can feel cold air seeping out of the vents. The fan will not spin. I tested the fan using a wire from the battery. The fan will ...

Overheats if left idling but not if driving...cooling fans aren't coming on...what couls be wrong? the cooling fans on your car are comanded on by the engine control module which reads engine ...

...working by turning on you Air conditioning. They should run constantly with the A/C on. Also bear in mind that the fans do not normally come on until the coolant temperature hits around 225-228 ...

...fan fans on radiator not working, car over heated and air conditioner stopped working all around the same time. need to use a voltmeter and tie into the wiring at the fan connectors and see if there ...

cooling fans will not come on (AC or radiator) Just installed Compressor, Accumulator, and orfice tube. Cleared codes, PSM, ACM, and PZM out of IPM fans came on for split second and then off. Will not

1994 cadilac fans not coming on, checked fans they work, it is 1994 cadilac deville fans not coming on, checked fans they work, it is not a fuse, what else can it be? And how do i check? the problem ...

...fan relay can be tested very easily by simply turning on the car's A/C. Even if your A/C unit isn't working, simply putting the dash controls to an A/C position, will automatically power up the ...

...fan to stop working because engine never gets hot enough to allow fan to come on. 3- your fan blower motor could be defective and needs to be replaced 4- your fan blower resister may need to be ...