1993 Subaru Loyale "hood latch" Questions

hood latch cable came loose. How can I open the hood? I just helped my brother get into the engine compartment of is 1996 or 1997 Loyale when his cable broke.   I used a loop of hanger wire, bent

...hood latch end. you will need to pry the latch open in the same direction that the cable release operates. this might be possible with a long flat screw driver with the grill in place. to accomplish ...

...hoodlatch broke how do i open hood it can be achieved by laying under the front of the car and tripping the hood latch manually ...replaced those cables many of times and opened many hoods that ...

...hood latch cable pulling it Can't open hood How do I fix it? You may be able to disconnect the cable behind the broken pull, then use a set of pliers to activate (pull) the cable within the sleeve - ...

hood from the grill?? Can't quite find the right latch... Someone with skills/tools to enter a car with the keys locked in it may be able to get you in there.Ask a locksmith(they will probably

Hood latch won't latch when closing Hood latch won't latch when closing Raise hood,have some one go pull hood latch and you look at latch and see if it releases,if it doesn't then ...

...hood latch from under front of car, underneath hood latch. good-luck!! Hi. Usually hoods came with safety latch that will prevent your hood from opening if hood release fails while drivng. Try to ...

...hood latch sometimes the hood adjustment for the latch is too tight, pull the hood latch, go out to the hood and press down on it at the latch location, push hard and release quickly, then adjust the ...

someone push down on hood while you pull hood latch, with latch pulled out hold it while helper pulls up on hood. If that does not work, try pulling up and down on hood with latch pulled open and held

...hood latch assembly, hood latch doesn't lock in place, all the the way down flush with bumper.where to adjust? Loosen the hood latch mounting bolts- you should then be able to move the latch assembly ...