1999 Jeep Grand Cherokee "tools needed replace cv joints" Questions

Ad

Question about Jeep Grand Cherokee

1 Answer

...tools needed. I do most of my own minor repairs. any help will be great. Not to bad you will need a ball joint spreader. some sockets wrench's.prybar.Remove the tire then loosen cv bolt. Remove brake ...

Ad

Question about Jeep Grand Cherokee

1 Answer

CV half shafts. What tool is needed to free the lower control arm ball joint? Thanks for your help. Generally no tool is required. If you use a "pickle fork" you will risk damaging the dust boot. Have

Ad

...tools you might require for this job: Jack and Jack Stands: Used to lift the vehicle safely and provide support during the repair. Wheel Chocks: Ensures that the vehicle stays in place while lifting ...

cv axle replacement in a 1994 toyota celica gts Jack up the car, remove the tire, you'll need to remove the axleshaft nut, disconnect the strut from the wheel hub. You can pull the wheel hub towards ...

Question about Jeep Grand Cherokee

1 Answer

...replace the drivers side CV joint on my 1993 Mazda MX-3. I have disasembled everything in order to remove old CV joint but the whole shaft came apart at the upper CV boot, and now I cant seem to get ...

Question about Jeep Grand Cherokee

1 Answer

...tools wrenches pry bar hammer. I would buy a Chilton's or a Haynes repair manual for torque specs for reassembly. Good luck and take your time. And unless the axles are making noise you can just ...

Question about Buick Cars & Trucks

1 Answer

replace one CV joint on the half shaft. The only special tool needed is the axle nut socket. support the vehicle, remove the wheel, remove the axle nut, remove the lower ball joint, separate the lower

Tools needed for replacing 2001 Hyundai Tiburon CV joints. Hi, I have a 2001 Hyundai Tiburon and my cv joints are needing replaced. I am just going to do it myself with some help instead of putting it

Question about Jeep Grand Cherokee

1 Answer

...tools are needed to replace the drivers side CV joint on my 2000 Ford Windstar. I would buy a rebuilt axle half shaft from your parts store and replace. It is cheaper than CV, boot. grease, and seal ...

Question about Jeep Grand Cherokee

1 Answer

...it? I need to replace a cv joint on a 1989 honda accord i have alot of the tools and have done alot of repairs befor /.... is this something i should attempt? This should be a piece of cake for

Not finding what you are looking for?
1999 Jeep Grand Cherokee Logo

3,837 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Jeep Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

john h

Level 3 Expert

29494 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...