1997 Jeep Grand Cherokee "low" Questions

Ad

Question about Jeep Grand Cherokee

2 Answers

to verify which achose is the low side to verify which ac hose is the low side AC hoses are normally marked on the caps of what side it is, a red cap indicated the high side whilst a blue would ...

Ad

Question about Jeep Grand Cherokee

1 Answer

A/C kicking in and out. Could you please tell me where the location of the low pressure switch is on a 2001 Jeep Grand Cherokee. V8 4.7 A/C has been recharged There are 2 lines coming off the AC ...

Ad

Question about Jeep Grand Cherokee

1 Answer

...slips starting in 4X4 I have no experience with 4X4 - am I supposed to keep the transmission in LOW while the 4X4 is engaged in LOW? I set the 4x4 to low and then started in Drive. 4x4 low is

Question about Jeep Grand Cherokee

1 Answer

lifters oil not low but lifters knocking Lifter noise is an indication of low oil pressure, that can be from low oil level and other things like a defective oil pump or plugged oil passages or ...

Question about Jeep Grand Cherokee

2 Answers

oil gauge drops low at idle when engine is warmed up oil gauge drops to low at idle. oil level is within normal range Low oil pressure at idle can be caused by an engine with worn rod or main bearings

Question about Jeep Grand Cherokee

1 Answer

2005 Jeep Laredo stuck in 4x4 low Used the jeeps 4x4 in low while driving in the snow today. When he reached the pavement it would not come out of 4x4 low. He tried many times but was not successful ...

Question about Jeep Grand Cherokee

2 Answers

...You will have vertical adjustment screws for each independent beam (separate highs and separate lows, but will be same screw if highs and lows are the same bulb). You may also have additional ...

Question about Jeep Grand Cherokee

1 Answer

which is low pressure side of a/c how am I sure which connector is the low pressure side to refill the freon. I have a slow leak that will last the season when filled. Low pressure side is the larger ...

only high beam headlights will work. cannot get low beams to work Hello! Low beam lights are powered by fuse #14 (10A), And fuse #15 (10A)...If fuse #14 is good check for +12 volts at the fuse...If ...

Question about Jeep Grand Cherokee

1 Answer

2000 Grand Cherokee will not go into 4 low I have a 2000 GC and when I try to engage 4 low I hear a grinding and a popping noise and the high to low shifter pops out of 4 low when i shift the ...

Not finding what you are looking for?
1997 Jeep Grand Cherokee Logo

3,380 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Jeep Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

john h

Level 3 Expert

29494 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...