1994 Jeep Grand Cherokee "cranks wont fire" Questions

...wont fire got new crank senser new pick up coil in distributor and new spark coil still wont fire what is the problem i was going down the road and it just shut off like turning the key off and quit ...

...cranks but wont start i got fuel pressure and i sprayed starting fluid and changed the cps and still wont start looking for any and all solutions Did it act like it wanted to start when you did that? ...

...wont start) no fire to ignition module.installed new ignition coil,crank position sensor,plugs,wires,cap & rotor. checked all fuses and fuel pump. not firing at ign coil Have you checked the cam ...

...wont im not getting fire Might be your crank sensor, your coil, your distributor or even your ecu. All of those being bad will prevent the jeep from firing. If you do not have a check engine light ...

...coil is firering, no fire to plugs, changed cap and button and crank sensor still will not start. If the spark for the coil is not hot hot enough it wont fire plugs... I assume you have checked ...

I need to know where the crank sensor is located on my 01 cherokee laredo i changed the crank position sesor but still doing the same wont fire over.

wont start, but cranks fast then: below:

1: check spark? (all must fire, not just one)
2: ever tuned it up in last 10 years, (now be the time....?)
3: if it's flooding do the super secret

wont start Okay, the possibilities are great. need to narrow it down a little. If it fails to crank over it is likely the battery. If it cranks over ok, but fails to start it is either lack of fuel or

wont fire turns over will not fire. Hello; First check for fuel pressure. If you have fuel pressure, then check for spark at the spark plug. Make sure the distributor rotor turns when you crank the ...

...and just quite , tryed starter fluid , wont fire ?? you need to see if your getting spark to the spark plugs, very possible you have a bad crank sensor try changing the pcm i just had to replace ...