2003 Lexus ES 300 "problems" Questions

...Module, Transmission Control Module). When a problem like this or other drive-ability related problems occurs the computer stores a record of the problem (there are of course some exceptions to ...

Transmission slip while driving regardless of the engine temperat This problem started when the time belt was changed when the car reached the 70,000 mileage. I want to know if a timing problem could ...

Overheating problem, fans not running when up to temp.. Temp. sensors okay, where is ECU IG fuse located on this car. Having a problem with the cooling and condensor fans, heating up problem on my ...

1999 Lexus - ES 300 - STalling Problem My 1999 Lexus ES 300 starts but but stalls as soon as the foot is off the accelerator. It has 95000 miles and have followed the maintenance schedule rigidly. Any

...stretches the belt. very little stretch, but it does. Since I started doing this I haven't had any problems with any timing jobs that I do. Good ...

...control module. There are exceptions to this, such as the Mass Airflow Meter and fuel pressure problems. What must be done is to have all the basic testing done such as a scan of the system for ...

whats code 1351? hi, this is an obd2 trouble code table, it can help you understand the code. Basically the engine is either at rest or cranking when the VCM (PCM) is monitoring for the high voltage ...

whats wrong with my car!? As im driving around 40-45mph, the car does a jerking thing. only when i release the gas does the jerking stop. When i push on the gas and exceed 45mph, the jerking stops and

I have a problem with my Audi A2 1.6 Fsi 2002. I have make all my regular controller, but after 182 000 km the car's lamp ignited engine. Can me explain somebody, what are the possibility that my car ...

I clean my 2002 Lexus terminal now it start but don want to run what can I do It is very possible that when you disconnected the battery the adapted settings by the car computer have been reset to ...