20 Most Recent
2000 Lexus ES 300 Questions & Answers
We replaced battery in key fob for 2003 lexus
I will help you I have been there before what you're going to have to do is program the key for the entire car and you can do that by following instructions on YouTube or you can call the dealership and I'll give you instructions for free
Headlight wiring 2000 Lexus ES300
if the vehicle was not designed for hids its best to make a relay system off the original head light wiring, like you would do for fog/spotlights this would draw power direct from the battery and not the original wiring as the original wiring may not be able to take the drain from the startup of the hids. there are kits for vehicles so no wire cutting is involved, just plugs into the original wiring. same with led kits. https://www.hidextra.com/lexus-es300-hid-kits/
Error code that says lean fuel. Injectors were
Yes the airflow meter is very easy, it is in the air intake hose to the engine from the air cleaner. Boy those Japanese car makers really take you to the cleaners on repairs, that repair on a GM car would have been 1/2 that amount.
Installation of the Lexus ES300 muffler consists
the bolt goes through the both flanges and the springs go against the last flange and under the nut of the bolt
it is a system that allows movement between the couplings so that the system doesn't crack from fatigue due to engine/ , pipe movement
I have a 2000 Lexus ES 300. I purchased it as a
Hi, have a good look on web, I was told similar over the top cost for ford focus, looked at web, and on that vehicle, insert key, turn on (till ign lights show, DO NOT START, turn back one click, then back to ign lights show AGAIN NOT STATRING, on board computer reprograms key.
That worked for me.
How do i change the oil pump on a 2000 lexus es300
Drain oil from the oil pan and recycle. Remove bolts holding oil pan up and remove oil pan. Remove bolt holding oil pump in. Install new pump. Replace oil pan gasket if necessary. Reinstall oil pan. Reinstall drain plug and refill with oil. Start engine and watch oil pressure gauge or light. Oil pressure should be normal almost instantly. Check for oil leaks.
Hello How Do I get the emergency brake to release ?
There may be a parking brake adjuster, loosen it off, see if it helps? Next, get at the rear brake assembly, if there is a star adjuster loosen it off, hopefully, that will loosen the brake pads? At the rear brake assembly, maybe you can get at the parking brake cable?
I can't see anything from here.
Safety is your responsibility, if you get brakes released, you need to make sure brakes work properly before driving, again.
Not finding what you are looking for?